The name Sumgai has by now become synonymous with the dread nemesis of all collectors, the cause of “the one that got away”. Of course, the real dark secret of Sumgai is that we all get a chance to be Sumgai ourselves sooner or later. As a wise fellow once said, “we have met the enemy, and he is us”
Well, it has finally happened, yet, as I relate this tale, be warned! In true Lovecraftian fashion, I am certain that It is still out there, somewhere, biding its time, awaiting the moment in which to strike again… It had been a poor couple of days, lots of looking, stopping every few blocks or so, to root through antique malls and shops, only to hear the same sad story. It had been here….. The dark and malignant presence of the evil demon of pen collectors, Sumgai. I heard the same terrible story from a hundred dealers.
“Oh, yes, we had a bunch of pens, one big old red colored one, and one was all silver. But Sungai was here yesterday and bought them all.” It was truly horrible, the devastation that had been wrought upon this area. I quailed under the knowledge that I was too late, I had missed my chance to save these pens from the grasp of Sumgai. It was as if It was everywhere at once, through some awful porthole to another dimension It came, snatching up the pens, never to be heard from again.
I began to despair of finding anything, so as I turned towards home, I was of a mind to pass by the gleaming new antique mall. But then a sixth sense warned me. I vague feeling of something calling to me, deep within the recesses of my mind. I stopped and pulled into the parking space that was suddenly there, right in front of the door. I went in, and for the first ten minutes, it appeared as if It had been here, or if there had just never been any pens, to begin with. Then suddenly, I saw them! A case with about ten pens in it! I looked wildly around for a clerk, certain that It had already gone to find one and was on Its way back to buy them all! But no, I found one, and she opened the case and laid them out on the countertop! Four Vacumatics, and a couple of 51s.
The Vacs were all priced the same, $125. There was a tooth-marked black standard, a green demi, a brown standard, and… A brown Oversized! The 51s told the same story, both priced the same, $50, a plain beaten black one, and a Signet capped double jewel. This was the time for action, swift and certain action! At any moment Sumgai could stroll through the door, and there was no telling what It might do when It found out I had beaten It at Its own game! I offered $150 for the Oversize and the Double jewel 51. No doubt glad to have helped in the defeat of Sumgai, the dealer agreed! I had triumphed!
As I drove away, I thought I saw an awful form materialize and slink into the store. It seemed that there was a horrible cry, but I couldn’t be certain, I had the radio turned up…
This article was originally published in Stylophiles.
Alan Green asks some basic questions:1) When a fountain pen has not been used for a while, what is the best way to clean it ( hot/warm or cold water, other substance, etc.)? 2) When a pen is in a coat pocket, handbag, etc., how do you keep it from leaking, practical tips? 3) How does one choose ink for a pen, brand name, or another factor?
1) The first solvent choice should always be cold water. Hot water can damage a pen, sometimes with terrifying rapidity. It’s usually reasonable to soak for extended periods, although hard rubber and casein will obviously not respond well to this sort of thing. The basic treatment is soaking and flush, soak and flush, until the pen works as it should. You can follow the water with a 1:10 solution of clear household ammonia in water, but don’t leave pens soaking in this stuff for long periods. If more aggressive measures are required, consider whether you’re skilled in disassembly, use of an ultrasonic cleaner, flossing nib slits and feed channels, etc. If not, consult your favorite repairer.
2) To keep a pen from leaking, keep it capped tightly, and carry it nib-end uppermost. This is why clips are on caps, not at the back end of the barrel. No joke, this is the only way that works. But be aware that it may not work if you take a pen flying. For flying, you should have your pen either completely filled (with as little air as you can possibly have) or completely empty.
3) You can choose ink by brand, as I do, or you can choose it by color, as I also do, or you can just buy pretty much at random and enjoy the variety. For my own use, I’ve settled on Waterman because I find that Waterman inks all flow and lubricate well, do not clog, and stainless than many other brands. And I like the colors. If you have a preference for a particular color, you can cycle through literally dozens of brands. Some will be better than others at satisfying the criteria I’ve listed. Some might turn out not to work for you at all. Some might be more subject than others to the dreaded SITB or mold. If you don’t have a preference for a particular brand or a particular color, the world could be your oyster with several hundred inks out there for you to play with. And if you find that you just don’t like any of ’em, you can start mixing your own. My favorite color — and my all-time favorite ink — is a 1:1 mixture of Waterman Violet and Waterman Florida Blue.
World‘s Best Ink Remover
You may recall that I recently cited World‘s Best Ink Remover as being useful for taking ink out of barrel threads as well as off your hands.
I used to see it on eBay from time to time, but John Bull told me recently that eBay had jerked all his auctions, claiming that he was keyword spamming. Try contacting John directly:
J.B. Sales & Marketing 3423 N Maryland Ave Milwaukee, WI 53211-2904
If you can make it to a pen show that John’s also going to attend, that’s actually a better place to get the product, as shipping single jars from Milwaukee isn’t precisely free.
Waterman CF Cartridge Update
Blaine Jack writes: I have had success using the “standard” short International cartridges in one of my CFS. They’re a slightly tight fit, but they do go in tight and seal OK. They are just a bit snug in the barrel. I wouldn’t recommend using these cartridges in the later CF-style pens that have the plastic cartridge sleeve on the back of the section, but for the top-line CFs with the metal sleeve, this option does work.
Sonofagun, he’s right! Here’s a CF with a short International cartridge installed. The red cartridge below is a CF cartridge; the black one is a short International for comparison. Note that you do need to force the cartridge in very tightly; I found that the best way was to “screw” it in firmly. To remove it, screw it out in the same direction as screwing in. If you “unscrew” it, you’re likely to unscrew the metal ferrule along with it.
Mike Walton asks Frank Dubiel while noting that the shell of a Parker “51” must touch the nib, saying that if it contacts the nib too tightly it will restrict ink flow. Is heating the shell and either pressing the nib against the shell or the shell against the nib a reliable means of increasing or decreasing inflow in a “51”?
First off, I have to disagree that Frank. I’ve seen innumerable “51”s whose hoods were very close to, but not in contact with, the nib, and in fact, the hood on my “regular carry” pen doesn’t contact the top surface of the nib. That said, it’s certainly desirable that these parts touch, as the hood is part of the capillary system by which ink is brought to the nib tip.
Heating the hood is generally, I think, a bad idea. Most “51” hoods are acrylic, which will take a lot of heat without even hinting that they want to bend, but some are polystyrene plastic, similar to the stuff used in the 61, and these won’t take nearly that much heat without going limp. Which is which? Unless you’re very experienced with the “51”, I wish you good luck guessing.
To adjust the flow in a “51” I use three techniques, all of which require that you remove the hood. The first is adjusting the tine spacing. (Please don’t just grab the pen and force an X-acto knife or other metal-destroying object between the tines; you will damage the slit walls.) This almost always results in a need to realign the tines and smooth the tip, but it is often easy and effective. Sometimes the fit of the hood is too close to allow the tines to be adjusted, and in these cases, I use a small rat-tail file to remove a very small amount of material from the inside of the hood where it lies adjacent to the nib. The last method, which I use primarily to restore flow on pens that quit from time to time, is to heat the feed and bend it very slightly toward the nib. The bend is in the vicinity of the breather tube’s vent hole near the back of the feed. Be careful here, as later feeds are plastic, not hard rubber, and don’t like this treatment at all!
Leaking Targa Nibs
Grady Walter asks: I have two Sheaffer Targa (slimline) pens. Both have developed mysterious leaks that appear to originate around the outside edge of the inlay portion of the nibs. Is there a way to eliminate this leak? Ink appears to build up around the underside of the nib more quickly when the pen is capped.
This is an unfortunate failing of Sheaffer’s otherwise wonderful Inlaid Nib®. The first line of defense is Sheaffer’s own service department, where you may still be able to get exchanges for defective parts. Send an email to Sidney Brown to see whether she can help you. If not, a possible remedy is to disassemble the pen and flow shellac between the nib and section shell. To get the shellac to flow easily, you’ll need to dilute it with denatured alcohol. Capillary action will draw the fluid into the space, and you can then dry it by placing the part under a lighted incandescent light bulb. I’m also investigating the use of a product that is intended for sealing cracks, but I don’t yet have enough data to recommend its use.
Finding Replacement Pen Sacs
Milt Butler asks: I purchased several old ink pens that need to be refurbished. Many of the pens have ink sacs that are missing or are so hard that they break. Can you tell me where I could buy replacement ink sacs?
There are several good places to buy sacs. The two that have the best variety are the Pen Sac Company and Wood Bin Ltd, which are manufacturers; but many pen dealers also have sacs for sale. Here’s a shortlist of good sources, in alphabetical order:
Wood Bin Ltd. R.R. # 6, Simcoe Ontario Canada N3Y 4K5 Web site: http://www.simcom.on.ca/woodbin/
I’ve written an article on sac replacement that you may find useful. There’s a copy of it on Pentace, but the copy on my own site is revised and improved. Click to read the article.
Yet More on Waterman CF Converters!
I reported that Fahrney’s, in Washington, D.C., (http://www.fahrneyspens.com/) has Waterman CF converters. (They call these parts “Lady” converters.) From Nick Sweeney comes a note that Peter Tweedle (http://ww.penmuseum.co.uk/) also has these converters. Peter is probably a better source for European collectors.
Although I’m in the business of repairing and restoring fountain pens, I’d be silly to ignore the fact that some collectors are eager not only to use but also to maintain and even repair their pens. Replacing a leaking, ossified, or otherwise dead sac is among the simplest and most straightforward repairs you can make, and I know from experience that it’s tremendously satisfying to start with a pen that won’t take ink and end with one that does. This article, then, is my way of sharing that pleasure with you.
It’s always a good idea to learn by practice rather than waiting until a precious pen is on the line. To this end, I suggest you buy a couple of cheap pens on eBay or at your local flea market or antique mall to teach yourself the ropes before you turn your attention to your minty red ripple Waterman’s Ideal No. 7 with the Blue nib. Arnold, Wearever, Epenco, and Tuckersharpe are some cheap names to look for, and there are countless no-name junkers that go for less than $10.00. (I use the term “junkers” loosely, as you already know if you’ve read Don Fluckinger’s recent Extra Fine Points series on these pens.) If you get pens that have sacs, you can easily rip ’em out. This, too, is part of learning to resaca pen.
Tools and Supplies
First, you need a supply of sacs. No problem. Shown here, from top to bottom, are No. 13, No. 16 (latex and silicone), and No. 22 straight sacs. At the bottom, for reference, are a Debutante Vacumatic diaphragm and a standard Waterman Ink-Vue sac.
My sac vendors of choice are the Pen Sac Company and Wood Bin Ltd. (Contact information for all the suppliers I mention is at the end of this article.) The Pen Sac Company sells a bewildering variety of straight sacs, necked sacs, tapered sacs, Ink-Vue sacs, and Vacumatic diaphragms. (“Diaphragm” is what Parker called the rubber doohickey in a Vacumatic so they could advertise the pen as being sacless.) They offer a couple of assortments as well as individual sacs. Their catalog includes several pages of information showing which sacs go into which pens. (There may be exceptions on a per-pen basis; the catalog says to use a No. 21 necked sac for a hard-rubber Duofold Junior, but I couldn’t even get a No. 20 to fit into the barrel of a Junior I resacked some time ago.) Wood Bin Ltd offers a smaller variety, but Wood Bin also sells straight sacs made of silicone. Silicone is sometimes a better choice than latex because it doesn’t outgas sulfur vapor that can cause some celluloid to turn brown.
You can also buy sacs from Fountain Pen Hospital, Pandemonium, and others; and Pen Sac Company and Wood Bin Ltd will of course be happy to sell you one or two sacs.
Next, you need sac cement. Some pen suppliers can sell you sac cement; several of the vendors I list here offer small bottles with an applicator brush for about $5.00. Being a professional cheapskate, I ran down to my local paint store and handed over about five bucks for a half-pint can of orange shellac, which is what the pen companies themselves used. I have enough shellac to last until my 273rd birthday. On the other hand, I don’t have that nice applicator brush, so I have to resort to subterfuge. I use toothpicks.
Steal your spouse’s talcum powder, but make sure that it is 100% pure talcum powder. Do not use baby powder or ladies’ dusting powder, or any powder that contains fragrances, cornstarch, zinc oxide, or other additives! These products are oiled to protect delicate skin, and oil eats rubber. Pen sacs are rubber… If there’s no plain talcum powder in the house, go buy a can. (I should point out that pure talcum powder is very hard to find these days; your best bet may be from a billiards supplier.) If you absolutely cannot find talcum powder, you can substitute powdered graphite. This stuff is sold by hardware stores and locksmiths for lubricating locks and other mechanisms that are exposed to cold and wet. It’s messy, but it does work.
The last pen-geek item you’ll need is section pliers. Many pens — most, really — don’t call for the big guns, so you may not need section pliers immediately. When the time comes, you can buy very good ones from Fountain Pen Hospital (shown here) or from Father Terry Koch.
Note that the Fountain Pen Hospital pliers shown here are actually intended by their manufacturer, K–D Tools, for use on automobile spark plug wires. You may be able to find them for a lower price at an auto parts store.
If you have a bench grinder, you can make your own section pliers out of garden-variety slip-joint pliers from a hardware store and some rubber fuel-line tubing from an auto parts store. If you go this route, you’ll need two pieces of tubing, each about an inch long, of a size to slip securely over one jaw of the pliers. Grind the teeth of the concave serrated part of the jaws, leaving a smooth curve, and slip one rubber onto each jaw. Position them so that they cover the part of the jaws that you ground smooth; that’s the area in which you’ll grip a section.
This is exactly the way Father Terry makes his section pliers, and to be quite frank, I bought a pair from him rather than expend the effort to make them.
Okay, you have the tools (with one possible afterthought, of which more below). Sit yourself down at a well-lighted table or desk, and we’re off.
Disassembly, Cleaning, and Sac Removal
The first job is to get the old sac out. This means taking the pen apart. Most pens have a section that is a slip friction fit (just pushed into the barrel), but some (notably button fillers, Touchdowns, and Snorkels) have a threaded section that screws out. Virtually all lever fillers, except a few early Sheaffers, are a slip fit. For simplicity, I’m going to describe only the typical slip-fit lever-filler in this article. (If you decide you like this kind of work, get a copy of “Da Book,” Frank Dubiel’s indispensable guide to fountain pen repair, and let Frank show you how to handle the more esoteric pens.)
First, try using your fingers to rock the section gently back and forth sideways, pulling as you rock, to break it loose. Don’t rock too far or you risk cracking the barrel!
If it refuses to budge, it’s probably shellacked in place. (Sheaffer shellacked violated sections but not hard rubber ones, for example.) You can resort to section pliers. Grasp the barrel firmly in your closed fist. (You can enhance your grip by using a rubber kitchen jar-lid gripper.) On the other hand, apply the section pliers to the section, and repeat the rocking/pulling action, twisting a little as if to unscrew the section. If it’s a slip-fitter, it’ll come loose unless it’s been shellacked in place, or possibly even glued (as on Waterman’s Taperite from the 1940s). In that case, you’re better off leaving it to a professional. Yes, I know, you just blew the price of a pen on tools. Use them on the next pen.
With the section loosened, you should be able to work it gently out of the barrel. Use your fingernails or a sharp kitchen knife to scrape all remaining fragments of the sac from the end of the section (the nipple). You need to get the nipple as clean as possible so the new sac will adhere properly. You can use your knife to scrape off the shellac that is probably there, and you can use rubbing alcohol as a solvent for this operation. But don’t use alcohol on a violated section; the plastic used for isolated sections is likely to be soluble in alcohol!
This is your opportunity to do your pen a favor by giving it a thorough cleaning. Drop the section assembly into a bath of diluted clear household ammonia for five or ten minutes. Make your solution by mixing 1 tablespoon (15 cc) of ammonia with 2/3 cup (160 cc) of water. After soaking the parts, scrupulously clean off any ink residue and the cleaning solution. This means flushing water through the system, which you can do by using an ear syringe to force water through the section from the sac end. (If you don’t have an ear syringe, you can use your mouth for this job.) When the assembly is clean, dry it thoroughly; blow some air through to dry the inside.
Clean the cap the same way, paying particular attention to getting the ink out from inside the cap. One way to do this is to use a paper napkin. Twist one corner of the napkin into a long thin spear, and insert it into the cap with a screwing motion. Turn in the direction that will keep the twist tight. Drive the paper as far down as you can get it. Repeat as necessary.
Now, if the sac didn’t come out in one piece, extract its remains from the barrel. Long thin alligator pliers, such as you can get from Wood Bin Ltd, Fountain Pen Hospital, or Widget Supply, can be helpful here but isn’t a necessity. If the sac is ossified, you can probably just dump out the chips. Occasionally you’ll run into a sac that has managed to glue itself, whole or in pieces, to the inside of the barrel. This can get ugly. I use various “afterthought” tools such as dental picks and scalers to chisel pieces of sac away from barrel walls. You can get dental picks from Wood Bin Ltd or Widget Supply. I find scalers very useful, and I get them from KV Vet Supply. Take your time; as with the nipple, you want to get the barrel clean. Be careful not to damage the filler assembly.
If the old sac died and dumped ink all over the inside of the pen, clean the barrel, too. You may also find that using your soaking solution on a barrel will make it easier to extract glued-in bits of the sac. Get the barrel absolutely dry afterward; any moisture left inside can corrode the parts of the filling assembly.
Sac Selection and Installation
With everything clean, you’re finally ready to install a new sac. If you don’t know the right size, try different sizes (you bought the assortment, right?) until you find a sac that just slips snugly into the barrel with the filler assembly in place. Then choose a sac two numbers smaller; if a No. 18 fits snugly, use a No. 16. You need to leave air space between the sac and the barrel to keep the pen from transferring your body heat into the sac when the pen is in your pocket. If the sac gets warm, the air in it expands, and it can force ink out through the feed. This makes the inside of the cap very messy, which is why you just cleaned it. No matter what sac size you end up with, it needs to be a stretch fit over the nipple. If you’ve chosen too small a sac, you may have to go up one size. You can try stretching the end of the sac over the nipple to verify that it’ll go.
The sac needs to be the right length. Most sacs are “straight” sacs; that is, the diameter of the sac is the same along its entire length. Sacs are made much too long; you will need to cut your new sac to the right length. To find how long it should be, slide it into the barrel, closed-end first until it hits bottom. Slide it back out about 1/8” (3 mm) so that it won’t butt against the end of the space into which it fits. Clamp it with your thumbnail right where it enters the barrel, and pull it out.
Still clamping it, hold it up to the section, lining your thumbnail up with the step on the section that seats against the end of the barrel. Now mark the point on the sac that corresponds to the step between the nipple and the part of the section that fits into the barrel. This distance will be between 1/4” (6 mm) and 1/2” (13 mm). In the illustration here, you can see a bright line where light is reflecting off the step between the nipple and the rest of the section.
Cut the sac at this point, being careful to cut straight across.
If your pen requires a necked sac (with the open end smaller than the diameter of the rest of the sac, like the neck of a bottle), you must rely on the information in the Pen Sac catalog or else measure the space into which the sac fits and then choose a sac of the proper length. You don’t cut necked sacs; they have to fit right. This may mean that you can’t order the exact sac you need until you’ve taken the pen apart.
With the sac ready to install, apply a small amount of sac cement (shellac) around the outside of the nipple. Be careful not to let the cement get into the inside; it’ll clog the feed — possibly permanently! Spread the open end of the sac, stretch it over the nipple, and adjust it so that it’s pushed all the way down and is seated against the step. If you find that you’re a little clumsy and have trouble fitting the sac in place, you can buy a sac spreader. Pandemonium offers these little gems for $5.00. I recommend that you buy yours yesterday, as today — with wet cement drying on your pen — isn’t the best time to go shopping. The sac should stand straight up, in line with the section, and the stretched part should be symmetrical on all sides. (The sac shouldn’t be pulled over toward one side of the nipple.) If you like, you can run a very small bead of cement around for an improved seal right where the sac butts against the step.
Once the sac is installed properly, the assembly is down. Go away for half an hour to let the cement dry. It doesn’t necessarily take half an hour, but if you adhere to a firm half-hour waiting period, you’ll never proceed too soon. Getting itchy and proceeding too soon means having a still-wet sac come off in your hands or leak in the pen or — worst of all — glue itself inside the barrel.
Now cover the new sac with a thin coat of talcum powder (or graphite). This will make it slide into the barrel more easily, and the filler will also work a little more smoothly. Reinstall the section into the barrel, aligning the lever with the nib as you go. (Some pens, mostly English brands such as Conway Stewart, usually have their levers aligned on the underside, 180° away from the nib surface.) There’s no need to cement a hard rubber or ordinary plastic section in place unless it’s close to falling out, but Sheaffer has always recommended that violated sections be shellacked in. If your section is so loose that it really does fall out, try shimming it with a bit of paper.
Et le voilà! You’ve just accomplished a task that used to require the services of a highly paid professional. You’re on the road to restoring your way to a better pen collection. Fill your revitalized pen and enjoy the ride!
Rumor says that you should rotate your fountain pen ink every 6 months to 1 year. This is another urban legend and is completely false. As long as the bottle stays tightly capped when not in use, the ink inside can remain usable for a very long time. Months at least. Probably years. The only enemy to stored ink is evaporation, and a tightly capped glass bottle prevents that.
Some heavily pigmented inks may look a bit muddy after a time on the shelf. Gently mix the pigment back into the ink by swirling it around in the bottle while the bottle is capped. Don’t shake it about… it isn’t necessary.
And, Greg Clark (author of “Fountain Pen Inks – A Sampler”) adds, “I would suggest adding (avoiding ñ ed.) sunlight. Don’t store bottles of ink for a long time in bright light or for any time on a sunny window ledge. The dyes fade – badly in some cases, like with turquoise inks.”
If the ink seems a bit thick, use an eyedropper and add a drop of plain water to the ink. Swish it about, then fill a pen with it and try it. If it seems ok, you’ve fixed your problem. It really is that simple.